Changeset 11071cf in robotics


Ignore:
Timestamp:
06/16/14 05:09:02 (8 years ago)
Author:
Steve Castellotti <sc@…>
Branches:
master
Children:
3dcd534
Parents:
e72c971
Message:
  • all screw holes added
File:
1 edited

Legend:

Unmodified
Added
Removed
  • car/design/2014.06.15-Robotics-Drill_Mount-v1/Robotics-Drill_Mount-v1.scad

    re72c971 r11071cf  
    8989                        cylinder(r=screw_hole_diameter, h=mount_plate_thickness); 
    9090                } 
    91  
    9291                // Front Left Screw Head 
    9392                translate(v=[-(switch_base_x/2)-(left_wall_x/2)-(mount_plate_screw_clearance/1.2), mount_platform_y/4, -(switch_base_z/2)-screw_head_height]) 
     93                { 
     94                        cylinder(r=screw_head_diameter, h=screw_head_height); 
     95                } 
     96 
     97                // Rear Left Screw Hole 
     98                translate(v=[-(switch_base_x/2)-(left_wall_x/2)-(mount_plate_screw_clearance/1.2), -mount_platform_y/4, -(switch_base_z/2)-(mount_platform_z/2)-(mount_plate_thickness/2)]) 
     99                { 
     100                        cylinder(r=screw_hole_diameter, h=mount_plate_thickness); 
     101                } 
     102                // Rear Left Screw Head 
     103                translate(v=[-(switch_base_x/2)-(left_wall_x/2)-(mount_plate_screw_clearance/1.2), -mount_platform_y/4, -(switch_base_z/2)-screw_head_height]) 
     104                { 
     105                        cylinder(r=screw_head_diameter, h=screw_head_height); 
     106                } 
     107 
     108 
     109                // Rear Right Screw Hole 
     110                translate(v=[(switch_base_x/2)(right_wall_x/2)+(mount_plate_screw_clearance/1.2), mount_platform_y/4, -(switch_base_z/2)-(mount_platform_z/2)-(mount_plate_thickness/2)]) 
     111                { 
     112                        cylinder(r=screw_hole_diameter, h=mount_plate_thickness); 
     113                } 
     114                // Rear Right Screw Head 
     115                translate(v=[(switch_base_x/2)(right_wall_x/2)+(mount_plate_screw_clearance/1.2), mount_platform_y/4, -(switch_base_z/2)-screw_head_height]) 
    94116                { 
    95117                        cylinder(r=screw_head_diameter, h=screw_head_height); 
Note: See TracChangeset for help on using the changeset viewer.