Version 8 (modified by sc, 10 years ago) (diff) |
---|
- MindWave RF dongle command to request "Auto-connect"
When the dongle receives this command from the application, the dongle will switch into auto-connect mode and connect to any headsets it can find. The dongle will search for headsets for 10 seconds.
Packet Format: (Headset Auto-Connect Command Byte)
Command Byte: 0xC2
The command above will connect to any headsets it can find within 10 seconds. Complete RF documentation attached to this wiki page.
Attachments (5)
-
mindwave_rf_protocol.pdf
(73.1 KB) -
added by sc 10 years ago.
NeuroSky MindWave RF Dongle Protocol
-
mindset_communications_protocol.pdf
(410.6 KB) -
added by sc 10 years ago.
NeuroSky MindSet Communications Protocol
-
Mind_Wave.pde
(9.3 KB) -
added by sc 10 years ago.
Mind_Wave.pde Arduino Code
-
Neurosky-eSense.pdf
(96.1 KB) -
added by sc 10 years ago.
NeuroSky eSense Meters
-
neurosky_esense_whitepaper.pdf
(197.3 KB) -
added by sc 10 years ago.
NeuroSky eSense Whitepaper
Download all attachments as: .zip