source: orbit/iOS/Orbit/HOW_TO_USE.txt @ 48584e4

ServoTab_Interfacepyramid
Last change on this file since 48584e4 was eac712d, checked in by Jonathon Horsman <jonathon@…>, 8 years ago

Added instructions

  • Property mode set to 100644
File size: 1.8 KB
Line 
1This app is for demonstrating the control of a helicopter through the NeuroSky Mindwave headset.
2
3Ensure the dongle which plugs into the phone's headphone socket is inserted (you may need to remove the cover from your phone) and the headphone volume is maximum.
4Also ensure the helicopter is fully charged and switched on.
5
6You should pair the headset with the phone. In your iPhone settings press General -> Bluetooth. Ensure Bluetooth is switched on then turn the headset on and hold in the 'pair' position for 3 seconds. The Mindwave Mobile headset should appear as a device in the list after a few seconds. Press on it to pair then launch this Orbit app.
7
8The app first looks for a Mindwave device via bluetooth and receives Attention and Meditation signals from it. Once the threshold for either is reached it begins playing a wav file which causes the helicopter to fly.
9
10There are 4 output bars and 2 input sliders. The sliders set the minimum threshold for Attention and Meditation.
11The Attention and Meditation output bars show the level of concentration. You can find out more about this on the Neurosky website: http://neurosky.com/Products/MindWave.aspx
12The attention meter has more emphasis on beta wave, and the meditation meter has more emphasis on alpha wave.
13
14The signal bar is the strength of the signal received from the headset, if this is zero the app is not receiving any signal. Ensure it's on, within range of the phone and seated properly on the head. Sometimes this takes some slight adjustments to get a signal.
15The hover bar is the volume the sound file is played to make the helicopter fly. The higher the Attention and Meditation the greater the volumne and therefore the height of the helicopter.
16
17The demo button allows you to test the app without the headset, and the phone will display simple log messages indicating received signals.
Note: See TracBrowser for help on using the repository browser.