Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Python problem: PART II
01-15-2014, 06:55 PM,
#2
RE: Python problem: PART II
(01-13-2014, 01:39 PM)alejandrocontenti Wrote: INFO: [Brainstorms:Helicopter_Control] Using PySide module
<---- [Helicopter Remote] Main thread running
data_payload: 0000005e05ff0a4b0e17135414aa
data_payload: 0000005e05ff0a4b0e17135414aa
data_payload: 0000005e05ff0a4b0e17135414aa

Then i understood that these are the codes that perform this:

data_payload: 0000005e05ff0a4b0e17135414aa (neutral)

data_payload: 0000035405ff0a4b0e17135414aa (hover)

data_payload: 0000035405ff0b540e17135414aa (fly_forward)

data_payload: 0000005e05ff08aa0e17135414aa (fly_back)


You can see from the console messages that Helicopter_Control is outputting the "neutral" command by default.

Try calling the script with a different flight command:

python Helicopter_Control.py --command=fifty_percent_thrust --device=COM3
Reply


Messages In This Thread
Python problem: PART II - alejandrocontenti - 01-13-2014, 01:39 PM
RE: Python problem: PART II - sc - 01-15-2014, 06:55 PM
RE: Python problem: PART II - alejandrocontenti - 01-16-2014, 01:35 AM
RE: Python problem: PART II - admin - 03-13-2014, 11:02 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)